Superhuman precision in microsurgery: TMC and Microsure are making it possible

Microsure and MUSA

Microsure is a company that specialises in medical devices, based in Eindhoven in the Netherlands and founded by Eindhoven University of Technology and Maastricht University Medical Centre. Dick: “Our focus is on improving the quality of life of patients by developing robotic systems for use in microsurgery. MUSA was designed in close cooperation with microsurgeons and engineers. While the (stereo) microscope helps microsurgeons see better, MUSA will help them better manoeuvre the needle and thread. Thanks to this robot, operations can be performed faster and the human limitations caused by tremors (vibrations) will be completely eliminated.

MUSA does not replace surgeons, but acts as a tool for them to use while operating on structures that are sometimes smaller than half a millimetre in diameter. One well-known operation that we can perform using the robot is lymphatic venous anastomosis, a microsurgical procedure that involves connecting multiple lymph vessels to a small nearby vein. Lymphatic drainage makes weekly massaging unnecessary for patients who have had to undergo a (breast) amputation. There are also advantages for surgeons – avoiding long periods of having to stand in an unnatural position helps prevent back and neck issues. There are two Employeneurs working on MUSA from TMC. One of them is Erik Niels.”

A fresh perspective

“Microsure was looking for support on a mechanical level – fresh blood and a fresh perspective,” explains Erik Niels. “After conducting a comprehensive technical analysis, I saw room for improvement when it came to the usability of the end effector. The end effector is the end of the robot arm, the part that simulates the surgeon’s hand and holds the instruments, also known as the ‘gripper’. I came up with a solution that is compatible with current operating techniques, instruments and other OR equipment. At the moment I am working on its further implementation. I dream of the robot being used worldwide as a mainstream tool in reconstructive plastic surgeries.”

Added value

What added value does Erik Niels from TMC bring to a project at a start-up like Microsure? “The people that Microsure employs are mainly specialised in software or have clinical expertise,” states Erik Niels. “Microsure has already offered me a job several times, but I can offer them more if I’m not ‘tied’ to them. Because as a part of TMC, I stay with a company for an average of one year. I am always learning new things that I can contribute. This means that my added value for Microsure as a part of TMC is greater than if I were a permanent employee.” Dick adds: “The major advantage for a start-up is that TMC sends people who are versatile and who are also proactive in thinking about the business proposition that they are working on, instead of just focusing on their own specialisation.”

Original solutions

“I am very happy with the collaboration with Erik Niels,” says Dick. “His input is extremely promising and his mechanical design skills are top-notch. Erik Niels is highly inventive and he thinks of fresh ideas and original solutions that we could never have come up with ourselves. He is very enterprising and is able to shift gears as soon as there is another work issue that needs attention.”

A childhood dream

“This is my first project with robots; a childhood dream come true,” reveals Erik Niels. “I love robotics and projects that mean something for humanity or the environment. What I’m creating doesn’t exist yet, which does make it a challenge. But what I enjoy most is that Microsure gives me all the freedom I need, as long as they see progress. That means I can draw on all my knowledge and experience and apply it in ways that were never possible before. All the machines I’ve contributed to so far have been a learning experience for me, allowing me to do what I do today. In developing MUSA, I feel that I can truly give something back and that is to help improve a lot of people’s quality of life.”

More blogs

24 March Fasten your seatbelts for TMC & Oerlikon Eldim

Oerlikon Eldim manufactures and processes parts for aircraft engines. They resell these parts to parties which themselves supply engines to large aircraft manufacturers such as Boeing and Airbus. As there was a lack of capacity and appropriate competences in the analytical field, Eldim called in TMC. Michel Werts, Senior Process Engineer at TMC stepped on board to help improve the efficiency of Eldim’s production processes. Together with his manager Sylvain Mégard, he tells us about their cooperation that went sky high in no time.

Fasten your seatbelts for TMC & Oerlikon Eldim

3 March Driving change at Neways through expertise and an entrepreneurial mindset

Neways develops and supplies electronics that contribute to key sustainability themes. More than 2,500 Neways specialists worldwide focus on developing future solutions for charging infrastructure for electric vehicles, electric power trains, digitalization of medical solutions, sustainable agricultural applications, microchip production and more. One of these specialists is Joey Bink, who has already opened many new horizons for Neways as project leader from TMC.

Driving change at Neways through expertise and an entrepreneurial mindset

221209-tmc-lamershightec-8634_verkleind_2024-05-27-131357.png

17 March Driving production excellence at Lamers with employeneurship

Lamers High Tech Systems specializes in the development, engineering, construction, qualification and implementation of installations, modules and machine parts for the transport and control of ultra-pure gases and liquids. These installations and products are manufactured under cleanroom conditions. TMC's Geert van Lin has the honor of temporarily filling the role of production manager of assembly in this rapidly growing production organization. Richard Wortelboer is operations manager at Lamers HTS. He gave Geert free rein.

Driving production excellence at Lamers with employeneurship

14 January Afrooz: “I enjoy my responsibilities at the startup company inPhocal”

Iranian industrial designer Afrooz dreamt of living abroad – at least for a while. After some years of working in her home country, she felt it was ‘now or never’. She quit her job and moved to Spain to get her master’s degree. Not in English, as was her original plan, but in Spanish. Through hard work, an eagerness to learn and perseverance she obtained her degree and eventually became an employeneur at TMC Spain. ‘Industrial design is the ideal combination of technology and art.’

Afrooz: “I enjoy my responsibilities at the startup company inPhocal”

View more client stories

Let's get in touch!

Reach out for opportunities, collaborations, or questions. We're here to connect.